How to fix thread properly in a sewing machine

(adsbygoogle = window.adsbygoogle || []).push({});

 How to fix thread in a sewing machine:

Sewing machine threading

       

         While learning to sew on a sewing machine, first learn 2 things very clearly to avoid mistakes while sewing.  Some basic things need to be learned to operate the machine properly.  

         You are taking training to learn sewing.  After you learn sewing you will cut and sew fabrics.  While cutting and stitching like that you face some difficulty in operating the machine.

What causes a new sewing machine to not sew properly?

        That is the difficulty in pedaling the machine.  This means that the machine wheel will not rotate properly.  This will cause the thread to cut while sewing.  Next is thread entanglement.  The thread comes in triplicate.  Making a thread loop.  

      

         Why does this problem occur, it occurs if the yarn is not inserted properly.  So it is very important to learn how to thread correctly on a sewing machine.  In this post we will see how to join the thread properly in the sewing machine.

      

         Some may have bought a new sewing machine.  They will also learn to sew.  They say they bought a new machine but the machine is not sewing properly.  They will say that the new machine is not good.  

         In fact, they may not have put the thread correctly.  Even a new machine will not sew if the thread is not attached properly.  Threading the sewing machine requires joining the thread in two places

       One is the thread that is put on the machine.  It involves putting a new thread on the machine stand as it is and traveling through some parts to attach it to the needle.  

       Another is to wrap the thread around the bobbin and put it inside the bobbin case and connect it to the shuttle at the bottom of the machine.  The machine will sew only if these two are done correctly.

How to spin yarn in Bobbin ?

        The bobbin case and the bobbin should be connected to the shuttle under the machine.  First let us know what is bobbin case.  Bobbin case looks like a small tub.  There is a lever on the back side of it.  

         This lever is used to easily remove the bobbin case from the shuttle.  The bobbin can be taken out of the shuttle by pulling the lever at the back of the bobbin case.  The bobbin case cannot be removed from the shuttle without pulling the bobbin case lever.  get stuck

          

         Only a good bobbin should be used which does not get damaged while spinning the bobbin thread.  Take a big needle.  Pick up a good thread.  

  

         Do not buy duplicate books.  Duplicate threads often cut while sewing.  Fit the thread on the sewing machine stand.  From there, wrap the thread around the bobbin four to five times by hand first.

Bobbin thread winding

         If your sewing machine has a bibbin winder, you can attach the bobbin to it and wind the thread.  If there is no bibbin winder, if the bobbin is attached to the big needle and friction occurs on the wheel of the machine, the thread will rotate in the bobbin.  

        While spinning the thread, hold the thread in your hand and slip it slightly and wrap it around the bobbin.  Do not wind the thread to the full bobbin capacity.  Bobbin may wind slightly less than full capacity

Bobbin into bobbin case fixing

         Next, the bobbin should be placed in the bobbin case.  Pull the thread through the gap in the bobbin case and take out the next leaf-like part through the inside.  Bobbin case tension should be set to medium.  

           Bobbin case tension is set to medium by default.  So it will be.  Better to keep it that way.  Before attaching the bobbin case to the shuttle, let us know how to attach the thread to the outside of the machine.

Bobbin case lever. Bobbin csse disconnect from shuttle 

How to thread a sewing machine?

         To attach the sewing machine thread, first fix the thread on the stand above.  Next there is a thread guider which has three holes.  Put the thread in the first hole.  

          If the thread you are putting is twisted, you need to thread the thread in the third hole.  Next is the eastern tention.  Pass the thread between the two plates in it and take it out through the spring attached to the tension.

Sewing machine thread stand

                       

          Next, take up the thread on the upper takeup lever.  Next, you need to apply it to the ring on the head plate.  Next, thread the loop on the needle bar.  

        There is a hole near the needle in the needle bar and the thread should be drawn there.  Finally, thread the needle.  When threading the needle, insert the left thread and take out the right side.  Next let's learn how to connect the bobbin case shuttle.

How to attach bobbin case to Shuttle?

         Bobbin case has a lever on the back side.  Put the bobbin in the bobbin case.  Put the bobbin case in Shuttle and press it and it will be fixed.  When you press like that, you will hear a thud sound.  

         If you hear that ticking sound, it means that the bobbin is properly fixed.  If there is no tuck sound it means that the bobbin case is not properly fitted.  Bobbin case should not be stitched without proper fit.  When sewing, the thread gets caught in the shuttle.

         To take the bobbin case out of the shuttle, pull back the lever on the back of the bobbin case.  Now we know how to attach and remove the bobbin case.  Next we will learn about taking out the bobbin thread through the needle.

How To Take Out Bobbin Thread Through Needle?

          First, while taking the bobbin thread through the needle, the needle thread should be kept slightly long.  At least 15 cm of thread should be cut from the needle.  

          The thread of the needle should be held in the left hand.  At the same time turn the sewing machine wheel one full circle with the right hand.  Now the needle shuttle enters and takes out the bobbin thread.

Sewing machine thread fixed

          Both the needle thread and the bobbin thread should be placed backwards under the presser feet.  The sewing machine is ready for sewing.  Now you can start sewing the clothes you want to sew.  I hope you found this post on how to thread a sewing machine useful.  Thanks

Watch the video below to see how to thread a sewing machine.    

how-to-fix-sewing-machine-bobbin-case.

• Tweet
• Share
• Share
• Share
• Share

About G Mani

Tailoring tutorial / sewing machines / accessories price / mechanism / tailoring class / tailoriing tools details / general services.

Related Post