How to change sewing machine treadle leather belt ~ Tailor kit

(adsbygoogle = window.adsbygoogle || []).push({});

How to change / replace sewing machine treadle leather belt
Tailor machine bedal wheal belt change / belt repair / rope fixing
Tailor machine bedal wheal belt change / belt repair / rope fixing

Learning to handle a sewing machine is also essential when learning sewing. Basically there are some things we need to know. Important If the needle is broken, be sure to know how to replace it. Need to know which parts of the oil to leave.

Only then can the sewing machine be maintained for a long time without malfunction. If the thread is stuck it will know how to fix and sew. The most important thing is to know how to change the wheel belt if worn. In this post we will learn how to replace leather belt in sewing machine

●How do you replace a belt on a treadle sewing maching?
●When will i change my sewing machine belt?
●How do you tighten a belt on a sewing machine?
●Why is my sewing machine belt slipping?
●How tight should a sewing machine belt be?
●I changed the belt but my sewing machine did not run
●Why does treadle belt slip?
●All questions Answers below!!

Sewing machine wheel

Necessary tools:

● Cutting blade, Big needle, Hammer.

In this post we will see, how to attach a new belt to a sewing machine. When buying a new belt will give 10 cm more length. First look at the size of the belt stuck to the wheel through the two holes in the machine table. Measure and mark the belt length required for the machine stand wheel and head wheel full circumstances

Pull the belt well and mark to be as tight as possible. If the marked size is cut and attached to the machine, the belt will sag. If the belt is loose the machine wheel will not spin fast. This can cause difficulty in operating the machine at the correct speed. That is, even if the stand wheel rotates, the machine wheel will not rotate or rotate slowly

Sewing machine wheel leather belt

Therefore, when cutting to the correct size required, the cut should be still 1/4 inch lower than the marked size. Only by cutting the belt size by 1/4 inch like this, will the machine rotate properly when sewing. To connect the two ends of the next cut, drill both sides to the required size to attach the back 1/2 inch inside the cut end.

It would be appropriate to use a large needle and hammer to drill. The two perforated ends should be connected by a pin. Using a cutting blade, bend the pin properly and press. This is the perfect way to attach a belt to a sewing machine or tailoring machine. It is good to learn to fix basic repairs on a sewing machine like this ourselves. There is no need to search for Machanic. The rest of the money paid to Machanic. Time left. At the same time orders can be completed on time

Watch the video below to learn more about this